ENER-J 200W Slimline DOB LED Street Light — 25,000 Lumens, 125 lm/W, Wide Voltage 175–400V, φ60 Pole Mount

At the top of the ENER-J Slimline DOB series sits the F318 — and it earns that position with 25,000 lumens from 288 LEDs at 200W. This is the 200W LED street light for highways, major arterial roads, ports, airport perimeters, and large industrial infrastructure — applications where every fitting needs to cover the maximum possible area with consistent, reliable output, and where a single point of failure has real consequences. Built for India’s most demanding environments, with a voltage range and thermal management specification to match.

Why the F318 Is the Definitive Choice for Maximum-Output Applications

• 25,000 lumens — the highest output in the series: At 200W and 25,000 lumens, each F318 fitting covers a wider area than any other streetlight in this range. For large-scale infrastructure projects — highways, arterial roads, wide industrial compounds — that translates directly into fewer poles required per kilometre or per hectare, lower civil and installation costs, and a more economical total project budget at scale.
• 288 LEDs for maximum, even distribution: Two hundred and eighty-eight LEDs spread across the largest housing in the series, directed by a high-efficiency nano reflector for wide, uniform coverage. At this LED count and output level, the light distribution across a wide road surface is consistent and even — no dark patches, no excessive hotspots, just reliable illumination across the full width.
• 125 lm/W at 200W — efficiency that scales: Across a highway or large arterial road installation of dozens or hundreds of fittings, the 125 lm/W system efficiency translates into significant annual energy cost reduction compared to conventional 200W HPS or older LED alternatives. The savings at this scale are measurable in lakhs of rupees per year for large municipal or infrastructure projects.
• Wide 175–400V input — built for India’s most variable grid conditions: Highway corridors, industrial estates, and port infrastructure often span areas where the grid supply is inconsistent — low-voltage sections, heavy industrial load variation, and voltage instability during peak demand. The F318’s 175–400V wide-range input handles the entire spectrum without fault, flicker, or LED degradation — critical for an installation where maintenance access is difficult and downtime is not acceptable.
• DOB technology for maximum reliability at 200W: At 200W continuous operation, the thermal stress on a conventional driver unit is significant — and driver failure is the single most common cause of high-wattage streetlight failure. The F318 eliminates this entirely by integrating the driver directly onto the LED board. Fewer components, fewer failure modes, better heat distribution, longer operational life between maintenance interventions.
• Built-in surge protection for infrastructure-grade resilience: Highway and port power supplies are subject to significant transient voltage events — from switching gear, heavy equipment, and grid restoration after outages. Built-in DOB surge protection handles all of these automatically, with no external device, no additional cost, and no maintenance requirement.
• Largest housing in the series — 513 × 186 × 22mm at φ60: The F318 uses the largest die-cast aluminium housing in the Slimline DOB series, providing the thermal mass and surface area needed to manage 200W of LED heat load over continuous long-term operation. The aerodynamic slimline profile minimises wind load on the pole arm — important for large exposed installations. φ60 pole-arm mounting is standard for main road and highway infrastructure poles.
• PF > 0.9 and CRI > 80 for compliant, specification-grade output: High power factor for efficient grid operation across large multi-fitting installations — important for utility billing and power factor penalty avoidance at commercial and municipal scale. CRI above 80 for accurate colour rendering of road markings, vehicles, pedestrians, and hazards — meeting road safety lighting standards.

Ideal Applications

• Highways and major arterial roads
• Port, airport, and freight terminal perimeters
• Large industrial estate and heavy manufacturing compound roads
• Wide-span logistics yards and container storage areas
• Large-scale municipal infrastructure lighting
• Stadium and sports facility perimeter lighting
• Railway yard and transport hub lighting

Specifications

• SKU: F318
• Power: 200W
• Lumen Output: ~25,000 Lumens
• System Efficiency: 125 lm/W
• LED Count: 288 LEDs
• Technology: DOB (Driver-on-Board)
• Input Voltage: AC 175–400V (Wide Range)
• Power Factor: PF > 0.9
• CRI: RA > 80
• Reflector: High-Efficiency Nano Reflector
• Housing: Die-Cast Aluminium, Grey
• Housing Size: 513 × 186 × 22mm (φ60)
• Mounting: Standard Pole-Arm Mount (φ60)
• Surge Protection: Built-in (via DOB design)
• Power Output: 100% Rated Power

What’s in the Box

• 1 × ENER-J F318 200W Slimline DOB LED Street Light
• 1 × Mounting Hardware
• 1 × User Manual

The largest application demands the highest output — and the F318 delivers it without compromise. When the road is wide, the stakes are high, and reliability over the long term is non-negotiable, this is the specification. Order yours today.