ENER-J LumiFlex Ultra FCOB Neon Strip — Red, 50M, 240 LEDs/m, 1000 lm/m, Direct AC, 2.5cm Cut, IP65

A restaurant ceiling cove in red is seen at close range by every guest, every service, every day for years. A wedding venue feature wall in red is the backdrop for thousands of photographs across hundreds of events. These are not applications where a dot pattern is acceptable or where an approximation of uniform red will do. The ENER-J LumiFlex Ultra N114 is a red FCOB LED strip for restaurant architecture and premium hospitality installations — FCOB technology at 240 LEDs per metre through super flexible milky silicone producing perfectly continuous, uniformly luminous red that meets the standard that permanent, high-expectations architectural applications demand.

Why Red at 240 LEDs/m FCOB Is the Permanent Architectural Specification

• FCOB at 240 LEDs per metre — perfectly continuous red for permanent installations: Red is one of the most emotionally impactful colours in interior architecture — and it’s also one where visible dot patterns are most noticeable to the untrained eye, particularly at close range in a warm, intimate dining environment where guests are stationary and have time to look. FCOB’s chip-direct bonding at 240 LEDs per metre through milky silicone eliminates every visible dot, producing red that runs as a perfectly warm, continuous line — the standard that a permanent restaurant installation requires from every element of the interior.
• Restaurant ceiling cove and feature lighting — the permanent red specification: Red ceiling cove lighting is one of the most requested design elements in Indian restaurant interiors — from fine dining establishments wanting a warm, intimate ambience to heritage restaurants wanting to evoke traditional Indian colour palettes. At 240 FCOB LEDs per metre, the N114 delivers red that’s uniform from the kitchen pass to the far dining wall — no variation in intensity, no dot pattern visible from any table in the restaurant, no colour inconsistency between rolls across a long cove installation. The standard that a restaurant interior, installed once and expected to last years, demands from its lighting.
• Wedding venue and banquet hall feature wall lighting: Red feature walls in wedding venues and banquet halls are permanent architectural installations that are the backdrop for thousands of events, thousands of photographs, and the visual memory of hundreds of couples. At 240 FCOB LEDs per metre, the N114’s red is uniform enough to photograph consistently and look genuinely premium at close range — the standard that a venue operator investing in permanent architectural red lighting needs to meet to justify the installation to every client who books the space.
• Luxury hospitality corridor and lobby red accents: Contemporary luxury hotels and premium hospitality venues increasingly use red architectural accents — corridor cove details, reception desk underlighting, lift lobby features, and bar counter architectural elements where red communicates warmth, luxury, and welcome. At 240 LEDs/m, the N114 produces red that’s consistent across every metre of a hotel corridor installation — from the first room to the last, at the same intensity, the same warmth, the same quality.
• Premium Diwali and festive permanent installation: For commercial properties, hotel lobbies, shopping malls, and institutional buildings that invest in permanent festive architectural lighting — red cove installations designed to be enhanced seasonally rather than replaced — the N114’s FCOB uniformity makes the permanent red installation look as intentional and premium during Diwali as it does during the rest of the year. A permanent red cove that looks equally good as ambient architectural lighting and as the centrepiece of a festive installation is worth the specification premium.
• Theatrical and event venue permanent red feature lighting: Stage proscenium arches, theatrical venue architectural features, event hall ceiling coves, and auditorium accent lighting in red all benefit from the N114’s uniform output at close viewing range — audiences seated near the stage or feature wall see the red as a continuous, premium architectural element rather than a string of individual LED points.
• Super flexible silicone for curved restaurant and venue profiles: Restaurant ceiling cove profiles, curved bar counter edges, circular banquet table perimeter lighting, and irregular venue architectural features all require a flexible strip material that follows curves without kinking or creating bright and dark spots. The super flexible silicone mix jacket of the N114 handles complex curves cleanly at 7×10mm profile — fitting standard architectural channels while maintaining the flexibility that real restaurant and venue installation conditions demand.
• Direct 220V AC — no driver for large hospitality installations: For restaurant and wedding venue projects where a single installation covers large areas with multiple architectural runs, the direct AC operation eliminates driver boxes across every installation point — simplifying the installation significantly and removing driver failure as a long-term maintenance concern in a commercial hospitality environment where lighting uptime is a business-critical requirement.
• Cut every 2.5cm — architectural precision for non-standard venue dimensions: Restaurant ceiling coves, bar counter lengths, and banquet hall feature wall dimensions are project-specific and rarely standard. The 2.5cm cutting interval gives lighting designers and installers the precision to fit the N114 exactly to any architectural specification — clean, professional, and without the waste or compromise that a 1-metre cutting interval forces on complex installations.
• 1000 lumens per metre — warm, impactful red at architectural scale: At 1000 lm/m, the N114’s red output is warm, rich, and impactful across a full restaurant dining room or wedding venue feature wall — present and defining under ambient illumination, not a subtle accent that gets lost against ceiling features or general lighting. The brightness that makes red architectural lighting feel deliberate and premium rather than simply decorative.
• IP65 for outdoor venue and covered outdoor applications: Fully sealed against dust and water — suitable for covered outdoor dining areas, garden venue architectural features, and any installation where the red needs to perform in an environment exposed to humidity, cleaning, or occasional weather exposure alongside the quality that an indoor architectural specification demands.
• Pure copper PCB for sustained red warmth across years of operation: Red LED colour can shift subtly over sustained commercial operation if thermal management is inadequate. Pure copper PCB construction keeps 240 FCOB chips running cooler, maintaining consistent red wavelength and warm output across the years of continuous operation that a permanent restaurant or venue installation requires.

Where the N114 Is Specified

• Restaurant ceiling cove and dining area feature lighting
• Wedding venue and banquet hall feature wall lighting
• Luxury hotel lobby, corridor, and bar architectural accents
• Theatrical venue and auditorium architectural feature lighting
• Premium retail and fashion boutique red feature lighting
• Permanent Diwali and festive commercial installations
• Covered outdoor dining and garden venue architectural lighting
• Heritage and traditional Indian restaurant interior features

Available Accessories

• ACC1133: 4A Lock-N-Lock Easy Connector with 2-Pin India Plug — for mains power connection
• ACC1134: FCOB Strip to Strip Connector — for joining two rolls seamlessly
• ACC1135: Silicone End Cap for FCOB Strips — for clean, sealed strip ends
• ACC1136: FCOB Strip to Strip Connector with 10cm Cable — for joining rolls with a gap

Red FCOB Ultra vs the Full Red Range

• N114 — Ultra FCOB, Red, Direct AC: Maximum uniformity at 240 LEDs/m — permanent restaurant coves, wedding venue feature walls, luxury hospitality architectural features where perfectly dot-free red at close range is the specification requirement.
• F223 — Neo 12V, Red, Milky Silicone: Authentic neon-tube red — 120 LEDs/m, dimmable, 2.5cm cut. For custom restaurant name signs, bar signage, and wedding quote signs where neon-tube appearance is the brief.
• F218 — Slim, Red, Clear Diffuser, Direct AC: Sharp vivid red — 120 LEDs/m, 9mm profile. For restaurant feature walls, gaming room accents, and retail displays where saturated precise red impact is the priority.
• F204 — Pro, Red, Frosted Diffuser, Direct AC: Soft warm festive red — 120 LEDs/m. For building outlines, wedding mandap perimeters, and wide-area Diwali installations.

Specifications

• SKU: N114
• Model No: 5050-60L
• Colour: Red
• LED Technology: FCOB (Flip Chip on Board)
• LED Type: SMD 2835 (Epistar)
• LEDs per Metre: 240
• Input Voltage: 220V AC (Direct — no driver required)
• Power Consumption: 9W per Metre (450W total roll)
• Luminous Output: 1000 Lumens per Metre
• PCB Material: Copper
• Jacket Material: Super Flexible Silicone Mix
• Jacket Size: 7 × 10mm
• Cutting Interval: Every 2.5cm
• Roll Length: 50 Metres
• IP Rating: IP65
• Net Weight: 3.5kg
• Gross Weight: 3.8kg
• Warranty: 1 Year
• MRP: ₹10,000 | SP: ₹4,000

What’s in the Box

• 1 × 50m LumiFlex Ultra FCOB Neon Strip Roll (Red)

For restaurant coves, wedding venue feature walls, and luxury hospitality architectural installations where red needs to be perfectly uniform, continuously luminous, and genuinely premium at close range — the LumiFlex Ultra FCOB N114 is the specification. Order your 50m roll today and add the required accessories at checkout.