Cool Comfort On the Go, Handheld Fan for Just ₹1,600
ENER-J LumiFlex Ultra FCOB Neon Strip — Blue, 50M, 240 LEDs/m, 1000 lm/m, Direct AC, 2.5cm Cut, IP65
Original price was: ₹10,000.00.₹3,999.00Current price is: ₹3,999.00.
Blue at 240 LEDs per metre through FCOB technology — the most uniform, most architecturally precise blue LED strip available in the LumiFlex range. Where standard 120 LED/m strips show a visible dot pattern even through diffusion, the N112’s FCOB construction at double the density produces an absolutely continuous, perfectly uniform blue neon effect through super flexible milky silicone. Direct 220V AC, no driver. Cut every 2.5cm. IP65. For building facades, luxury pool edges, hotel lobby features, and commercial architectural installations where blue uniformity is a specification requirement, not just a preference.
Standard blue rope lights and LED strips produce a dot pattern — visible at close range, unavoidable with standard SMD construction at any density up to 120 LEDs per metre. The ENER-J LumiFlex Ultra N112 eliminates it entirely. FCOB (Flip Chip on Board) technology at 240 LEDs per metre for architectural blue lighting produces an absolutely continuous, perfectly uniform blue output through super flexible milky silicone — the specification for building facades, luxury pool edges, hotel lobby features, and commercial architectural details where the quality of the blue light is visible to every person in the space and a dot pattern would be immediately and permanently noticeable.
Why Blue at 240 LEDs/m FCOB Is a Different Specification Entirely
- FCOB at 240 LEDs per metre — the end of visible dots in blue: Blue LEDs are particularly unforgiving of dot patterns — the colour wavelength and typical viewing conditions for blue architectural installations (pool edges, building facades, hotel lobbies) mean that even a well-diffused 120 LED/m strip shows dot structure at close range. At 240 LEDs per metre with FCOB’s chip-direct bonding, individual light points are physically indistinguishable through milky silicone — the blue runs as a perfectly continuous, uniform line. Not nearly continuous. Perfectly continuous.
- The building facade and architectural outline specification: Blue is one of the most commonly specified colours for commercial building facade outlines, contemporary office building perimeter lighting, and architectural feature lighting across Indian cities. The N112’s 240 LED/m FCOB construction produces a blue that’s uniform from the first metre to the last across a full 50-metre facade run — no variation in intensity, no dot pattern visible from the street, no colour temperature inconsistency between sections.
- Luxury pool edge and water feature precision lighting: Pool edge lighting in five-star hotels, luxury resorts, and premium residential properties demands the highest-quality blue available — visible to guests at close range in a controlled, high-expectations environment. The N112’s perfectly uniform FCOB blue through milky silicone creates a pool edge installation that reads as genuinely premium — the kind of continuous, luminous blue that enhances the water colour and creates the five-star pool aesthetic that standard LED strips approximate but never quite achieve.
- Hotel lobby and corridor blue architectural feature lighting: Contemporary luxury hotel lobbies increasingly use blue architectural lighting as a feature element — wall cove accents, ceiling detail lighting, and reception desk underlighting in blue that communicates premium and contemporary design. At 240 LED/m, the N112 delivers uniform blue across any cove length without the dot pattern that would compromise the polished hotel aesthetic when seen from the reception desk or lobby seating.
- Super flexible silicone mix jacket for complex architectural profiles: The super flexible silicone mix jacket construction allows the N112 to follow complex architectural profiles — curved building cornices, circular pool edges, oval ceiling coves, and complex facade outlines — without kinking, deforming, or creating bright and dark spots at curves. At 10mm jacket width and 7×10cm overall profile, it fits into standard architectural cove channels while maintaining the flexibility for any installation shape.
- Direct 220V AC — no driver for large architectural installations: For large-scale building facade work and hotel installations where concealing driver boxes across multiple installation points is architecturally and practically challenging, the direct AC operation of the N112 is a significant specification advantage. Connect directly to mains power with Lock-N-Lock — no driver to source, install, or eventually replace across dozens of installation points.
- Cut every 2.5cm — architectural precision across any specification: Building facade sections, pool edge lengths, and hotel corridor cove dimensions are rarely standard. The 2.5cm cutting interval gives installers and specifiers the precision to fit the N112 exactly to any architectural specification — clean, waste-free, and without the compromise that a 1-metre cutting interval forces on non-standard lengths.
- 1000 lumens per metre — vivid blue impact at architectural scale: At 1000 lm/m, the N112 delivers blue output that’s impactful at architectural scale — visible and vivid on a building facade from the street, present and luminous around a pool edge in ambient light, and clearly defined in a hotel lobby under general illumination. This isn’t a decorative accent that gets lost in the environment — it’s a blue that commands attention and defines the architectural feature it’s installed in.
- IP65 for outdoor facade and exposed installations: Fully sealed against dust and water — the specification for building facades, pool edges, outdoor architectural features, and any installation where weather exposure, cleaning operations, and long-term outdoor durability are requirements alongside light quality.
- Pure copper PCB for sustained blue colour fidelity: Blue LED colour can shift over sustained operation if thermal management is inadequate — pure copper PCB keeps the 240 FCOB chips cooler, maintaining consistent blue wavelength and output across years of continuous architectural installation operation.
Where the N112 Is Specified
- Commercial building facade and architectural outline lighting
- Five-star hotel and luxury resort pool edge lighting
- Hotel lobby, corridor, and reception desk feature lighting
- Contemporary residential architectural blue feature coves
- Premium spa and wellness centre blue architectural accents
- Retail flagship and showroom blue feature lighting
- Outdoor building perimeter and facade blue outline lighting
- Aquarium, water feature, and fountain architectural lighting
Available Accessories
- ACC1133: 4A Lock-N-Lock Easy Connector with 2-Pin India Plug — for mains power connection
- ACC1134: FCOB Strip to Strip Connector — for joining two rolls seamlessly
- ACC1135: Silicone End Cap for FCOB Strips — for clean, sealed strip ends
- ACC1136: FCOB Strip to Strip Connector with 10cm Cable — for joining rolls with a gap
Blue FCOB Ultra vs the Full Blue Range
- N112 — Ultra FCOB, Blue, Direct AC: Maximum uniformity at 240 LEDs/m — architectural facades, luxury pool edges, hotel lobbies, and commercial installations where perfectly dot-free blue is the specification requirement.
- F212 — Neo 12V, Blue, Milky Silicone: Premium neon-tube blue — 120 LEDs/m, dimmable, 2.5cm cut. For custom blue neon signs, bar features, and dimmable architectural cove work.
- F216 — Slim, Blue, Clear Diffuser, Direct AC: Sharp electric blue — 120 LEDs/m, 9mm profile. For gaming rooms, nightclub accents, and tech displays where vivid saturated blue is the priority.
- F203 — Pro, Blue, Frosted Diffuser, Direct AC: Soft atmospheric blue — 120 LEDs/m. For wide-area pool atmospheres, spa ambience, and large decorative installations.
Specifications
- SKU: N112
- Model No: 5050-60L
- Colour: Blue
- LED Technology: FCOB (Flip Chip on Board)
- LED Type: SMD 2835 (Epistar)
- LEDs per Metre: 240
- Input Voltage: 220V AC (Direct — no driver required)
- Power Consumption: 9W per Metre (450W total roll)
- Luminous Output: 1000 Lumens per Metre
- PCB Material: Copper
- Jacket Material: Super Flexible Silicone Mix
- Jacket Size: 7 × 10mm
- Cutting Interval: Every 2.5cm
- Roll Length: 50 Metres
- IP Rating: IP65
- Net Weight: 3.5kg
- Gross Weight: 3.8kg
- Warranty: 1 Year
- MRP: ₹10,000 | SP: ₹4,000
What’s in the Box
- 1 × 50m LumiFlex Ultra FCOB Neon Strip Roll (Blue)
For architectural lighting specifications where blue uniformity is non-negotiable — building facades, luxury pool edges, hotel lobbies, and commercial features where 240 LEDs per metre of FCOB precision makes the difference between a specification met and a specification exceeded. Order your 50m roll today and add the required accessories at checkout.








Reviews
There are no reviews yet.